Industry Spin Flash Dryer for Drying Silicon Dioxide Kaolin Clay Drying Machine

• Customization: Available
• After-sales Service: 1 Year
• Movement Way: Combined
• Model NO.: XSG
• Atomization: Rotary Atomization
• Flow: Contra-Flow
• Heating Mode: Transmission
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Drying Medium: Inactive Gas, Superheated Steam, Effluent Gas, Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Application: Chemicals Processing, Plastics Processing
• Dimension(L*W*H): Variable
• Core Components: Bearing, Gear, Gearbox, Motor, Other
• Transport Package: Wooden Case
• Trademark: WEITUO
• Origin: Changzhou
• HS Code: 8419399090
• Production Capacity: 2000sets/Year

Product Description

Product Description

Descriptions
Hot air enters into stirring and crushing and drying chamber from the bottom of dryer with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifuge,
shearing, impacting and friction effect. It strengthens the process of heat exchange. At the bottom of dryer, the large and damp granule is crushed under the action of stirrer and the granule that is small in partical and contain less moisture will lift accompainied with revolving air stream. During the period of lift, it is dried further. Because gas and solid two phases flow in heat exchange, so the machine as strong drying capacity

Applications

Applications

1. Inorganic: boric acid, calcium carbonate,hydroxide, copper sulphate, iron oxide, carbanic acid barium, antimony trioxide, various kinds of metal caustics, various kinds of heavy metal salt, formating the ice crystal, etc..
2. Organic: Atrazine(agriculture chemical insecticide ), cadmium laurate, benzoic acid. Monosultap sodium oxalate, cellulose acetate
3. Pottery: Kaolin, axidizing silicon, clay.
4. The dyestuffs: Anthracene quinone, black iron oxide rust, indigo pigment, butyric acid, hydrogen oxidize the titanium, zinc sulfide, various kinds of azo dyes intermedia .
5. Food: Soy protein, gelatinized starch, distiller's grains , wheat candy, wheat starch .

 Sketch of Flow Chart

Product Parameters

Features

1. Because the raw material particulate exists in high dispersing state caused by centrifuge, shearing, impacting and rubbing effect. Moreover the relative velocity between solid and gas phases is high, so it strengthens the process of heat exchange.  Therefore the machine has strong drying capacity.
2.  Dry gas enters into the bottom of drier and produces strong rotating air stream that exerts strong rushing effect to raw material on the wall, therefore the phenomenon of stricking on the wall is removed;
3.  At the bottom of drier, where is high temperature area, heat sensitivity raw material can not contact with heat surface directly, therefore it solves the carbonization and color change problems of heat sensitivity raw material;
4. Because gas speed at circle inside the drying chamber is high and the staying time of raw material is short, high efficiency and quick speed can be realized. It is possible for small equipment to carry out large-scale production;
5. There are rotational flow pieces and elutriation ring inside the drying chamber.  It is used to control the moisture and granule of raw material to the needed level.
Technical parameters 

Model	XSG-2	XSG-4	XSG-6	XSG-8	XSG-10	XSG-12	XSG-1e	XSG-20
ID of main machine(mm)	200	400	600	800	1000	1200	600	2000
Air amount(m/h)	350~500	1150~2000	2450~4500	4450~7550	7000~12500	0000~18000	8000~30500	50000-78000
Evaporated moisture(kg/h)	12~17	40~70	80~150	150~250	230~420	300~600	600~1000	1000~1500
Max equipped capacity(kW	10	20	40	65	90	135	270	430
Max.hight(m)	4.0	4.8	5.8	6.4	7.1	7.8	8.5	10.1
Occupied area(m)	15	20	28	35	40	52	80	50

Note:
1. The evaporated amount of moisture is calculated when the temperature of inlet is 180ºCand the temperature of outlet is 80ºC.
2. Besides the models above mentioned, special specification can also be made as request.
3. The equipped capacity above mentioned is standard.  The power can also be decreased in accordance with practical conditions.
Raw materials to be treated and characteristics(based on Model 6)

Name of raw material	inc stearate	aluminum hydroxide	zinc carbonate	insecticide	TMTD TMTD	D S D  DSD acid	Ferric oxide red	antimony dioxide	cuprous chloride	Wh  te  carbon  black
T of air inlet(ºC)	150	180	150	120	140	150	200	180	200	280
Primary moisture(%)	80	55	80	30	65	60	60	45	30	85
Final moisture(%)	0.5	1.5	1.0	1.0	0.5	0.5	0.5	1.0	3.0	5.0
Practical dry capactiy(ka/h)	140~160	250~280	130~170	80~110	80~120	80-120	300~350	280~320	290~310	250~300

 

Name of raw material	ZDC acceleran	oil ink	subsititute zinc mangabate	phthal yanin dye	calcium citrate	Superfin alcium carbonate	slurry reatmen agent	sodium isocyanurat dioxide	sodium isocyanuat tnoxide
T of air inlet(ºC)	50	150	120	150	140	160	200	180	150
Primary moisture(%)	60	45	30	55	40	70	75	25	30
Final moisture(%)	0.5	2.0	1.0	1.0	1.0	1.5	5.0	0.2~2	1.0
Practical dry capactiy(kgh)	80~110	350~380	120~150	160~180	300~350	430~470	290~310	80~120	90~150

 

Company Profile

 
 

Certifications

Project Cases

Exhibitions

FAQ

Q1: What is the equipment price?
A1: The equipment price is determined according to the product size, product characteristics and product material.

Q2: What is the packaging method?
A2: Naked packaging and wooden box packaging, damage compensation

Q3: What is the temperature range?
A3: The temperature range is 50-270 degrees and can be controlled

Q4: What is the heating method?
A4: There are many heating methods, such as steam, hot air, electric heating, natural gas, etc.

Q5: How long does it take to deliver?
A5: Within 15 days at the earliest

Q6: What does your after-sales service include?
A6: Our afer-sales service includes
(a) Equipment installation and commissioning
After the equipment is completed and the buyer's installation and commissioning notice is received, the supplier will immediately send personnel to install and commission the equipment.
(b) Operator training
Since the equipment is installed and commissioned, the buyer's operators will learn the working principles of the equipment and the maintenance elements during the operation process under the guidance of the supplier's after-sales service personnel, master the theoretical and practical experience of using the equipment, and produce qualified products.
(c) Equipment warranty
The equipment warranty period is one year. The supplier will provide free repairs for any equipment failure caused by manufacturing quality during the warranty period.
(d) Technical service
The supplier will provide free technical consultation for any technical problems encountered during use.
(e) Equipment maintenance after the warranty period
If there is any problem with the equipment after the warranty period, the supplier will provide high-quality maintenance services and original accessories at a unified preferential price.
(f) Service commitment
All door-to-door services will arrive in the most timely manner.
(g) After-sales service spare parts inventory guarantee
The supplier has sufficient spare parts and will send them out within 4 hours according to user needs.