Ypg-Pressure Spray Dryer Manufacturer and Commissioning Pressure Spray Granulation Dryer

• Customization: Available
• After-sales Service: 1 Year
• Movement Way: Combined
• Model NO.: YPG
• Atomization: Rotary Atomization
• Flow: Contra-Flow
• Heating Mode: Transmission
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Drying Medium: Inactive Gas, Superheated Steam, Effluent Gas, Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Dimension(L*W*H): Variable
• Transport Package: Wooden Case
• Trademark: WEITUO
• Origin: Changzhou
• HS Code: 8419399090
• Production Capacity: 2000sets/Year

Product Description

Product Description

Descriptions
The set is an apparatus that can finish drying and granulating at the same time. The needed ball granule with certain size and ratio can be got in accardance with requirements of process to adjust pressure, flow, and size of atomizing hole.
The working process of set is as follows: the liquid of raw material is pumped in through diaphram pump.
The liquid of raw material atomizes into tiny droplets. Then if gathers with hot air and fall off. Most parts of powder material will be collected through the outlet of discharge at the bottom. The wasted air and fine powder will be separated through cyclone. The wasted air will be exhausted through draught fan and powder will be collected through collector at the bottom of cyclone. At the outlet it can also be equipped with two grades of duster. it ratic of recovery will be over 96-98%.
The tower body , pipes, separator of set where will contact with raw material are made of SUS304. There is enough layer of heat preservation between inner and outer case of tower body. The filed material is fine glass cotton. The tower body is also equipped with olbservation door, sight glass, lamp-house and control meters and instruments that is controlled and displayed through electric control panel.
The heat source of set may be steam or electric heater. Its features are convenient in operation, quick in start, compact, clean hot air and so on. Moreover being installed control and regulating device inside electric contral cabinet, the inlet temperature can be cantrolled through stepiess regulation. The steam, coal fuel of ail fuel can be applied to the place where has not electricity. It can replace electric heating partially or fully.
The factory can provide different heating way in accordance with the practical condition of customer.

Applications

Applications

Granulating through atomizing dry.
1. Chemical industry: organic catalyst, resin, synthetic washing powder, oils, thiamin, dyestuff, intermediate of dyestuff, white carbon black, graphite, ammonium phosphate and so on.
2. Foodstuff: amino acids and similar substances, flavoring, protein, starch, dairy products, extractive substance from coffee, fish powder, extractive substance from meat and so on.
3.Pharmaceutical: Chinese patent medicines, agrochemicals, antibiotics,medical drinking agent and so on.
4. Ceramics: magnesium oxide, kaoline , all kind of metallic oxide, dolomite and so on.
5.Granulating through atomizing: all kinds of fertilizer, Aluminum oxide, ceramics powder, pharmaceutical. Heavy metallic super hardness steel, Chemical fertilizer, washing powder, Chinese patent medicines and so on.

Product Parameters

Features

1.The dry speed is fast. The surface area of raw material liquid after being atomized will be increased greatly.95-98%of moisture can be evaporated at moment. The time to finish dry needs about ten seconds to several tens of seconds. It is suitable for drying thermal sensitive material particularly.
2. The finished product is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quality is good.
3. It scope of application is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granulate. It has strong adaptability toraw materials.
4.Its operation is simple and stable and its control is simple and convenient and is
easy to realize automatic operation.

Sketch of Flow Chart


Technical parameters 

Model Item	YPG-20	YPG-50	YPG-100	YPG-150	YPG-200	YPG-300	YPG-500
(kg/h)water evaporation	20	50	100	150	200	300	500
(m)overall dimensions		1.2*8.9	1.8*11.5	2.2*13.5	2.4*14.8	2.8*15.4	3.4*18.8
Power(KW)powe	6.6	8.5	14	22	24	30	45
(ºC)inlet temperature	180~350
(%)water moisture	2~5
(%)materialrecovery	99
(KW)electrical heating	54	75	120	180	200ºC,

Company Profile

 
 

Certifications

Project Cases

Exhibitions

FAQ

Q1: What is the equipment price?
A1: The equipment price is determined according to the product size, product characteristics and product material.

Q2: What is the packaging method?
A2: Naked packaging and wooden box packaging, damage compensation

Q3: What is the temperature range?
A3: The temperature range is 50-270 degrees and can be controlled

Q4: What is the heating method?
A4: There are many heating methods, such as steam, hot air, electric heating, natural gas, etc.

Q5: How long does it take to deliver?
A5: Within 15 days at the earliest

Q6: What does your after-sales service include?
A6: Our afer-sales service includes
(a) Equipment installation and commissioning
After the equipment is completed and the buyer's installation and commissioning notice is received, the supplier will immediately send personnel to install and commission the equipment.
(b) Operator training
Since the equipment is installed and commissioned, the buyer's operators will learn the working principles of the equipment and the maintenance elements during the operation process under the guidance of the supplier's after-sales service personnel, master the theoretical and practical experience of using the equipment, and produce qualified products.
(c) Equipment warranty
The equipment warranty period is one year. The supplier will provide free repairs for any equipment failure caused by manufacturing quality during the warranty period.
(d) Technical service
The supplier will provide free technical consultation for any technical problems encountered during use.
(e) Equipment maintenance after the warranty period
If there is any problem with the equipment after the warranty period, the supplier will provide high-quality maintenance services and original accessories at a unified preferential price.
(f) Service commitment
All door-to-door services will arrive in the most timely manner.
(g) After-sales service spare parts inventory guarantee
The supplier has sufficient spare parts and will send them out within 4 hours according to user needs.