Hg Series Scratch Cylinder Board Dryer for Cereal Potato Flakes

• Customization: Available
• After-sales Service: 1 Year
• Movement Way: Combined
• Model NO.: HG
• Atomization: Rotary Atomization
• Flow: Contra-Flow
• Heating Mode: Transmission
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Drying Medium: Inactive Gas, Superheated Steam, Effluent Gas, Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Transport Package: Wooden Case
• Trademark: WEITUO
• Origin: Changzhou
• HS Code: 8419399090
• Production Capacity: 2000sets/Year

Product Description

 

Product Description

Descriptions
It is inner heating conductive drying equipment; the wet materials gain the heating from the wall of the roller to dehydrate the water. The heating is transferred from the inner roller wall to the outer wall and then goes through the film. The thermal efficiency
is very high, so it can be continuously operated. It is widely used for drying liquid or paste materials.

Applications

Applications

Such processes as the HG series cylinder desiccator is used in such trades as the food, chemical industry, medicine, etc. viscidity, lotion pastel supplies film-making, dry extensively.

Product Parameters

Features

1. High thermal efficiency. Because of drum dryer heat transfer mechanism of heat transfer, heat transfer direction is consistent throughout the operating cycle, in addition to the heat dissipation and heat loss, all of the remaining heat used for tube materials
on the membrane evaporation of moisture, thermal efficiency can reach 80% -90%.
2. Large elasticity of operation, and wide applicability. The adjustable roller drier many drying factors. Such as the concentration of the feed, the thickness of the coating material, the temperature of the heating medium, rotating speed of drum etc, can change the drum dryer drying efficiency, and many factors mutual involvement. This drum drying operation to bring a lot of convenient, make it can adapt to a variety of dry materials and different prodluction requirements.
3. The drying time is short. The drying period of materials is normally 10 to 15 seconds,suitable for heat-sensitive materials. If set the roiller dirier in vacuum, can run under the condition of reduced pressure.
4.  Fast drying rate. Due to the membrane material of coating put on in the wall is thin, generally in 0.3-1.5 mm, and the heat transfer and mass transfer in the same direction,material of membrane surface can keep the 30-70 kg.H,0/m2.h

Technical parameters 

Model size			ffective Heating Area(m)	Drying capacity (Kg/h)	Steam Consumption(kg/h)	wer of Moto (kw)	Sizes LxWxH (mm)	Weigh (kg)
	Sam	ALengu
HG-600	Φ600x800		1.12	40-70	100-175	2.2	1700×800×1500	850
HG-700	φ700×1000		1.65	60-90	150-225	3	2100×1000×1800	1210
HG-800	φ800×1200		2.26	90-130	225-325	4	2500×1100×1980	1700
HG-1000	φ1000×1400		3.30	130-190	325-475	5.5	2700×1300×2250	2100
HG-1200	φ1200×1500		4.24	160-250	400-625	7.5	2800×1500×2450	2650
HG-1400	φ1400×1600		5.28	210-310	525-775	11	3150×1700×2800	3220
HG-1600	φ1600×1800		6.79	270-400	675-1000	11	3350×1900×3150	4350
HG-1800	φ1800×2000		8.48	330-500	825-1250	15	3600×2050×3500	5100
HG-1800A	φ1800×2500		10.60	420-630	1050-1575	18.5	4100×2050×3500	6150

Company Profile

 
 

Certifications

Project Cases

Exhibitions

FAQ

Q1: What is the equipment price?
A1: The equipment price is determined according to the product size, product characteristics and product material.

Q2: What is the packaging method?
A2: Naked packaging and wooden box packaging, damage compensation

Q3: What is the temperature range?
A3: The temperature range is 50-270 degrees and can be controlled

Q4: What is the heating method?
A4: There are many heating methods, such as steam, hot air, electric heating, natural gas, etc.

Q5: How long does it take to deliver?
A5: Within 15 days at the earliest

Q6: What does your after-sales service include?
A6: Our afer-sales service includes
(a) Equipment installation and commissioning
After the equipment is completed and the buyer's installation and commissioning notice is received, the supplier will immediately send personnel to install and commission the equipment.
(b) Operator training
Since the equipment is installed and commissioned, the buyer's operators will learn the working principles of the equipment and the maintenance elements during the operation process under the guidance of the supplier's after-sales service personnel, master the theoretical and practical experience of using the equipment, and produce qualified products.
(c) Equipment warranty
The equipment warranty period is one year. The supplier will provide free repairs for any equipment failure caused by manufacturing quality during the warranty period.
(d) Technical service
The supplier will provide free technical consultation for any technical problems encountered during use.
(e) Equipment maintenance after the warranty period
If there is any problem with the equipment after the warranty period, the supplier will provide high-quality maintenance services and original accessories at a unified preferential price.
(f) Service commitment
All door-to-door services will arrive in the most timely manner.
(g) After-sales service spare parts inventory guarantee
The supplier has sufficient spare parts and will send them out within 4 hours according to user needs.